Takom Leopard C2

The past two days I’ve managed to stick some more bits on and improved a couple of parts. Starting with the rear hull the tow hooks were scribed as per the front ones I did a few days ago, the mountings for the barrel clamp were replaced as I managed to lose one of them when it pinged into oblivion from the tweezers, also the two mountings moulded on the hull to the right of the barrel clamp were cut off and had holes drilled into them before being glued back into place. The tool box on the left had the chunky looking rail on the top cut away and replaced with a length of stretched sprue.

 The biggest single improvement you can make is to thin out the rear light surrounds as they are quite thick as shown in this picture;

The one on the right after I attacked it with a scalpel.
Moving onto the hull sides and there are indents moulded into the plastic to aid with placement of the on-vehicle equipment and on the left side they work quite well but on the other side I decided to fill them all as there were some serious gaps where the tools fitted. The tools had the clamps replaced where necessary with fuse wire.

Although it doesn’t say in the instructions, the two photo etch parts supplied for the top of the hull need the top edges folding;

Finally for this post there is a duct that runs from the top of the drivers vision blocks to just above the front right fender. This is supplied in the kit as a solid block however on the real vehicle it is hollow so I drilled out either ends then shaped them with a scalpel;

I also added a couple of brackets from scrap PE sheet.
I don’t have much left to do with the hull apart from the tracks and figuring how to mount the side skirts so the turret will be next.

Published by andyk21

I've been a modelmaker for a verrry long time and still show no signs of growing out of it after 48 years. I mainly build tanks, aircraft and paint figures but generally do whatever takes my fancy whether it's historical, Science-fiction, a 'what-if' or because it has pretty colours and looks nice. I'm hoping that you find my blog interesting and useful, particularly if building a model that I have built and documented here.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


Where building models, is all we ever want to do!

Model Airplane Maker

Building and improving scale models

%d bloggers like this: